Specification
Engine: Bore x Stroke
55 x 43 mm conditions={"imperial":"2.17 x 1.69 in."}
Specification
55 x 43 mm conditions={"imperial":"2.17 x 1.69 in."}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Push in the choke knob. Wait 30 seconds, then continue to crank the engine for starting.
Diagnostic · Cause: Cooling water intake obstruction, water pump failure, or blockage in cooling system Test: Stop engine and check cooling water intake for obstruction
Spec · 102 mL conditions={"imperial":"6.22 in.³"}
Procedure · 1. Place outboard in a vertical operating position. 2. Remove the oil drain plugs (upper and lower), and completely drain the gear oil into a pan.
Diagnostic · Cause: Fuel flooding Test: Push in choke knob, wait 30 seconds, then continue cranking