Specification
Ignition: Spark Plug
NGK BPR7HS-10
Specification
NGK BPR7HS-10
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Ensure the fuel system has been prepared for storage per the Fuel System procedure above. WARNING: Refer to Maintenance – Spark Plug Inspection and Replacement for the correct procedure for removing spark plug boot...
Spec · 1.0 mm (0.040 in.)
Procedure · 1. Remove the spark plug boot by twisting the rubber boot slightly and pulling it off. Do not use any sharp object or metal tool to remove the spark plug boots. WARNING: Damaged spark plug boots may emit sparks that c...
Spec · 27 Nm conditions={"lbIn":"20 lb. in."}
Procedure · 1. Place the outboard in water. Start the engine and let it run in neutral to warm up. 2. With engine running at fast idle, stop the fuel flow by closing the fuel shut-off valve. 3. When engine begins to stall, quickl...