Specification
Spark plug: Spark plug torque
27 Nm conditions={"lbIn":"20 lb. in."}
Specification
27 Nm conditions={"lbIn":"20 lb. in."}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Remove the spark plug boot by twisting the rubber boot slightly and pulling it off. Do not use any sharp object or metal tool to remove the spark plug boots. WARNING: Damaged spark plug boots may emit sparks that c...
Diagnostic · Cause: Improper installation of the outboard on the transom Test: Verify outboard is mounted per Mercury Marine validated fastener instructions and torque specifications
Spec · 1.0 mm (0.040 in.)
Procedure · 1. Ensure the fuel system has been prepared for storage per the Fuel System procedure above. WARNING: Refer to Maintenance – Spark Plug Inspection and Replacement for the correct procedure for removing spark plug boot...
Spec · NGK BPR7HS-10