Diagnostic
Excessive wear at roots of belt grooves
Cause: Belt wear or misalignment Test: Visual inspection of belt groove roots
Diagnostic
Cause: Belt wear or misalignment Test: Visual inspection of belt groove roots
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Inspect the accessory drive belt for any of the following conditions: cracks in the back of the belt or in the base of V grooves; excessive wear at the roots of the grooves; rubber portion swollen by oil; belt surf...
Procedure · 1. Visually inspect the entire lanyard cord for any breaks, cuts, or wear. 2. Check that the clips on both ends of the cord are in good condition. 3. Replace any damaged or worn lanyard cords before operating the boat...
Diagnostic · Cause: Belt misalignment or wear Test: Visual inspection of belt edges and outer surfaces
Procedure · 1. Remove the spark plugs to inspect. 2. Inspect the spark plug electrode for wear and the insulator for roughness, cracks, breaks, or blistering. Also check that precious metal is visible on the spark plug electrode....
Diagnostic · Cause: Belt wear or age Test: Visual inspection of belt surface