Accessory drive belt cracked on back or at base of V grooves

Related KB links

• Transom clamp bracket / Accessory mounting plate: Minimum clearance between accessory bracket and transom clamp bracket radius

  Spec · 3.175 mm (0.125 in.) conditions={"context":"Accessory mounting plate must not rest in the radius of the transom clamp bracket"}

• Accessory Drive Belt Inspection

  Procedure · 1. Inspect the accessory drive belt for any of the following conditions: cracks in the back of the belt or in the base of V grooves; excessive wear at the roots of the grooves; rubber portion swollen by oil; belt surf...

• Dual-Handle Electronic Remote Control (ERC): ERC Reverse Gear Engagement

  Spec · First detent rearward from neutral conditions={"direction":"Pull handle back"}

• Mounting Accessories to the Transom Clamp Bracket

  Procedure · 1. Mount the engine to the transom or jack plate in accordance with the engine installation instructions. 2. Identify unused bolt holes in the transom clamp bracket for accessory attachment (refer to Figure 1). 3. Ens...

• Excessive wear at roots of belt grooves

  Diagnostic · Cause: Belt wear or misalignment Test: Visual inspection of belt groove roots