Procedure
1. Engage the tilt support lever by rotating the knob to bring the support lever upward. 2. Lower the outboard to rest on the tilt support lever. 3. Disengage the tilt support lever by raising the outboard off the support lever and rotating the tilt support lever down, then lower the outboard. Parts: Tilt Support Lever, Knob
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 50 % of normal throttle demand conditions={"mode":"Dock Mode engaged"}
Diagnostic · Cause: Use of common (non-locking) nuts instead of required self-locking nylon insert locknuts, or improper installation/torque procedures Test: Inspect fasteners for correct part numbers (10-849838 bolt, 11-826709113...
Spec · 3 turns counterclockwise
Procedure · 1. Place both ERC levers in neutral. 2. Press the 1 LEVER button. The button light turns off.
Diagnostic · Cause: ERC levers moved after pressing the transfer button Test: Listen for single beep and observe transfer button light turning off as confirmation of terminated request; do not move ERC levers after pressing the tr...