Stop Engine via Stop/Start Button

Related KB links

• Helm Transfer System: Helm Transfer Request Timeout

  Spec · 10 seconds conditions={"description":"Time allowed to complete the second TRANSFER button press before the request is automatically cancelled"}

• Neutral light flashing on Slim Binnacle ERC

  Diagnostic · Cause: Engine is in Throttle-Only mode Test: Check if Throttle-Only mode has been activated via the 'Throttle-Only' button (item d) on the ERC

• PCM / Engine Guardian: Overspeed Rev Limit Trigger

  Spec · Greater than or equal to the overspeed RPM limit conditions={"reference":"See Specifications section for exact RPM value"}

• Start Engine via Stop/Start Button

  Procedure · 1. Ensure the ignition key is in the ON position. 2. Press the stop/start button to start the engine.

• Starter Motor Will Not Crank the Engine

  Diagnostic · Cause: Lanyard stop switch not in RUN position