Procedure
Tilting to Full Up Position – Tilt at Engine (Cowl Mounted Auxiliary Tilt Switch)
1. Use the cowl mounted auxiliary tilt switch to tilt the outboard. This can be done with the key switch in the OFF position.
Procedure
1. Use the cowl mounted auxiliary tilt switch to tilt the outboard. This can be done with the key switch in the OFF position.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · below 2000 RPM conditions={"mode":"Shallow water operation","note":"Reduce engine speed below 2000 RPM before tilting outboard up"}
Diagnostic · Cause: Lanyard stop switch not in RUN position
Spec · 3 turns counterclockwise
Procedure · 1. If the ignition key switch has been turned off for over 15 minutes, turn it to the ON position. 2. Press the trim/tilt switch to the up position. The outboard will tilt up until the switch is released or it reaches...
Diagnostic · Cause: Remote control is not shifted to the neutral position