Procedure
1. Bring the front of the cowl down first and engage the front cowl hook. 2. Lower the cowl into the seated position and apply downward pressure to the back of the cowl to lock it in place. 3. Ensure the cowl is securely fastened by trying to pull up on the back of the cowl.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 25 Nm conditions={"fastener":"top screws with hex nuts (2)","lb_in":"89"}
Diagnostic · Cause: Key switch is not in the Run position Test: Verify key switch is set to Run position before using the Stop/Start button
Spec · 3.17 mm conditions={"note":"No step in the transom mounting surface is allowed"}
Procedure · 1. Unlock the top cowl by pulling out on the rear cowl latch. 2. Lift the top cowl off the engine.
Diagnostic · Cause: Faulty lanyard stop switch Test: Start engine, pull lanyard cord, and observe whether engine stops