Specification
Engine: Break-in Phase 2 duration
8 hours conditions={"phase":"Phase 2","restriction":"Avoid continuous full throttle for more than 5 minutes at a time"}
Specification
8 hours conditions={"phase":"Phase 2","restriction":"Avoid continuous full throttle for more than 5 minutes at a time"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. For the first two hours of operation, run the engine at varied throttle settings up to 4500 RPM or at three-quarter throttle, and at full throttle for approximately one minute every ten minutes. WARNING: Failure to...
Diagnostic · Cause: Critical engine condition detected; Engine Guardian system may engage and limit power Test: Key engine to ON and listen for horn signal pattern
Spec · 5 minutes conditions={"phase":"Next 8 hours"}
Procedure · 1. Read the Pre-Starting Check List, special operating instructions, Engine Break-in Procedure, and Gear Shifting in the Operation section, and the remote control features and operation in the Features and Controls se...
Spec · 2 hours conditions={"phase":"Phase 1"}