Specification
Engine: Break-in Phase 1 duration
2 hours conditions={"phase":"Phase 1"}
Specification
2 hours conditions={"phase":"Phase 1"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. For the first two hours of operation, run the engine at varied throttle settings up to 4500 RPM or at three-quarter throttle, and at full throttle for approximately one minute every ten minutes. WARNING: Failure to...
Spec · 8 hours conditions={"phase":"Phase 2","restriction":"Avoid continuous full throttle for more than 5 minutes at a time"}
Procedure · 1. Read the Pre-Starting Check List, special operating instructions, Engine Break-in Procedure, and Gear Shifting in the Operation section, and the remote control features and operation in the Features and Controls se...
Spec · 5 minutes conditions={"phase":"Next 8 hours"}
Spec · ~1 minute every 10 minutes conditions={"phase":"First 2 hours"}