Procedure
1. Check that clutch engages correctly when operating the shift lever. Adjust if needed. 2. Visually check propeller for bent or damaged blades. Replace if damaged. 3. Check the propeller nut is tightened and the split pin is in the correct position. WARNING: Loose propeller nut or incorrect split pin position may cause propeller loss.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Diagnostic · Cause: Physical damage or wear to propeller blades Test: Visual inspection of propeller edge and blade geometry
Spec · Slow idle conditions={"note":"Engine must be at slow idle before shifting to prevent gear and clutch damage"}
Procedure · 1. Fuel System – Check the amount of fuel in the tank. Replenish as needed. WARNING: Do not use outboard motor if any abnormality is found during pre-operation check or it could result in severe damage to the motor or...
Diagnostic · Cause: Bent or damaged propeller blades Test: Check propeller for bent or damaged blades; replace propeller and retest