Specification
Battery: Battery Terminal Voltage – 1/2 Charged
11.7 V conditions={"chargeCondition":"1/2 charged"}
Specification
11.7 V conditions={"chargeCondition":"1/2 charged"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Fuel System – Check the amount of fuel in the tank. Replenish as needed. WARNING: Do not use outboard motor if any abnormality is found during pre-operation check or it could result in severe damage to the motor or...
Diagnostic · Cause: Battery is dead Test: Check battery charge; if dead, use the manual relief valve to allow manual tilting
Spec · 11.7 V conditions={"chargeCondition":"1/2 charged"}
Procedure · 1. Check that the main switch functions normally. Replace if faulty. 2. Check that the battery electrolyte level and specific gravity are normal. Replenish or recharge as needed. 3. Check for loose connections on the ...
Diagnostic · Cause: Weak battery or battery connections are loose or corroded