Specification
Battery: Battery Terminal Voltage (Fully Charged)
13.2 V conditions={"chargeCondition":"Fully charged"}
Specification
13.2 V conditions={"chargeCondition":"Fully charged"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 13.2 V conditions={"chargeCondition":"Fully charged"}
Procedure · 1. Check that the main switch functions normally. Replace if faulty. 2. Check that the battery electrolyte level and specific gravity are normal. Replenish or recharge as needed. 3. Check for loose connections on the ...
Diagnostic · Cause: Dead battery or failed power tilt switch. Test: Attempt to operate the power tilt switch; if no response, check battery charge and switch continuity.
Procedure · 1. Place the battery box in a convenient position and away from possible water spray. Securely fasten both the box and the battery so they do not shake loose. 2. Connect the positive lead (+) to the positive terminal ...
Diagnostic · Cause: Battery is dead Test: Check battery charge; if dead, use the manual relief valve to allow manual tilting