Specification
Battery: Battery Terminal Voltage – Fully Charged
13.2 V conditions={"chargeCondition":"Fully charged"}
Specification
13.2 V conditions={"chargeCondition":"Fully charged"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Read all warnings shown on the battery case before handling. WARNING: Battery electrolyte contains sulfuric acid — hazardous, causes burns on skin contact and is poisonous if swallowed. Wear safety glasses and rubb...
Diagnostic · Cause: Dead battery or failed power tilt switch. Test: Attempt to operate the power tilt switch; if no response, check battery charge and switch continuity.
Spec · 13.2 V conditions={"chargeCondition":"Fully charged"}
Procedure · 1. Fuel System – Check the amount of fuel in the tank. Replenish as needed. WARNING: Do not use outboard motor if any abnormality is found during pre-operation check or it could result in severe damage to the motor or...
Diagnostic · Cause: Battery is dead Test: Check battery charge; if dead, use the manual relief valve to allow manual tilting