Specification
Battery: Battery Terminal Voltage – Fully Discharged
10.5 V conditions={"chargeCondition":"Fully discharged"}
Specification
10.5 V conditions={"chargeCondition":"Fully discharged"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Fuel System – Check the amount of fuel in the tank. Replenish as needed. WARNING: Do not use outboard motor if any abnormality is found during pre-operation check or it could result in severe damage to the motor or...
Diagnostic · Cause: Battery is dead Test: Check battery charge; if dead, use the manual relief valve to allow manual tilting
Spec · 10.5 V conditions={"chargeCondition":"Fully discharged"}
Procedure · 1. Check that the main switch functions normally. Replace if faulty. 2. Check that the battery electrolyte level and specific gravity are normal. Replenish or recharge as needed. 3. Check for loose connections on the ...
Diagnostic · Cause: Dead battery or failed power tilt switch. Test: Attempt to operate the power tilt switch; if no response, check battery charge and switch continuity.