Engine / Motor Assembly: Transom Height - Short (S)

Related KB links

• Trim angle adjustment – Power tilt type: Transom angle adjustment

  Procedure · 1. Stop the engine. 2. Shift into neutral position. 3. Tilt up the outboard motor. 4. Lock the tilt stopper. 5. Change the trim lock pin position as shown in the picture: (1) Trim lock pin, (2) Higher, (3) Lower.

• OTHERS - Engine speed abnormally low / Boat speed low / Overheating of engine / Warning lamp ON

  Diagnostic · Cause: Transom too high or too low

• Engine / Motor Assembly: Transom Height - Long (L)

  Spec · 562 mm (22.1 in)

• Trim angle adjustment – Manual tilt RC type (Transom angle adjustment)

  Procedure · 1. Stop the engine. 2. Shift into forward. 3. Raise the outboard motor to the tilt up position.

• Engine failing to start / Engine starting but stopping soon / Poor idling / Poor acceleration / Engine speed abnormally high / Engine speed abnormally low / Boat speed low / Overheating of engine / Warning lamp ON

  Diagnostic · Cause: Transom too high or too low