Engine: Overall Length (MF)

Related KB links

• Remote control cable installation

  Procedure · 1. Measure the distance from the remote control box to the outboard motor along the intended cable route. 2. Prepare a cable that is 300–450 mm (11.8–17.7 in) longer than the measured distance. 3. Temporarily pull the...

• MFS 8/9.8B MF variant: Overall Length (MF)

  Spec · 975 mm (38.4 in) conditions={"model":"MFS 8/9.8B","variant":"MF"}

• Flushing engine using test tank

  Procedure · 1. Remove the propeller before starting the engine in the test tank. (See page 70) WARNING: Do not start engine without removing propeller; accidentally turning propeller could cause personal injury. 2. Ensure the wat...

• Engine: Overall Length (EF/EP)

  Spec · 590 mm (23.2 in) conditions={"model":"EF/EP"}

• Flushing by test tank

  Procedure · 1. Remove the propeller before starting the engine in the test tank. WARNING: Do not start engine without removing propeller — turning propeller out in the open may lead to personal injury. 2. Place the outboard motor...