Specification
Ignition: Spark Plug Gap
0.8–0.9 mm (in: 0.031–0.035)
Specification
0.8–0.9 mm (in: 0.031–0.035)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Remove the top cowl. 2. Remove the spark plug caps. 3. Remove the spark plugs by turning counter-clockwise using a 5/8" (16 mm) socket wrench and handle provided in the tool bag. 4. Inspect the spark plug. Replace ...
Diagnostic · Cause: Touching ignition coil or spark plug cord during start/operation Test: Safety inspection — ELECTRICAL SHOCK HAZARD label (5-4)
Spec · 0.8–0.9 mm conditions={"altUnit":"0.031–0.035 in"}
Procedure · 1. Stop the engine. WARNING: Do not touch spark plugs immediately after stopping the engine as they will be hot and could cause severe burns. 2. Remove the top cowl. 3. Remove the spark plug caps. 4. Remove the spark ...
Diagnostic · Cause: Dirt, soot, etc. on spark plug