MFS 6BZ: Starting System (MF)

Related KB links

• Cold Engine Starting Procedure (Manual Starter Type)

  Procedure · 1. Set the throttle grip to START position. 2. Set the control lever in the Neutral position. 3. Pull the choke knob fully. (Choke is not necessary when the engine is warm — set throttle grip to RE-START position inst...

• Hard starting or stalling immediately after starting

  Diagnostic · Cause: Emission control system issue

• MFS 6BZ: Starting System (EF/EP)

  Spec · Electric starter motor conditions={"variant":"EF/EP","note":"With Manual Start"}

• Cold Engine Start – Manual Starter Type

  Procedure · 1. Pull the choke knob fully out. WARNING: Choke is not necessary when the engine is warm. Set the throttle grip to RE-START position instead. 2. Pull the starter handle slowly until you feel engagement, keep pulling ...

• Blown fuse

  Diagnostic · Cause: Short-circuit or electrical overload in the system Test: Remove fuse and visually inspect for blown condition; replace with fuse of identical specified rating only.