MFS 6BZ: Trim Positions (MF)

Related KB links

• Trim angle adjustment – Manual tilt RC type (Transom angle adjustment)

  Procedure · 1. Stop the engine. 2. Shift into forward. 3. Raise the outboard motor to the tilt up position.

• Steering difficulty or loss of boat control during cruising

  Diagnostic · Cause: Improper trim angle (excessive trim up or down) Test: Reduce speed immediately; stop boat and inspect thrust rod / priset knob position Expected: Thrust rod / priset knob positioned so hull runs horizontal

• MFS 6BZ: Trim Positions (EF/EP)

  Spec · 3 conditions={"variant":"EF/EP"}

• Trim angle adjustment – Manual tilt type (Transom angle adjustment)

  Procedure · 1. Stop the engine. 2. Shift into neutral. 3. Raise the outboard motor to the tilt up position. 4. Change the thrust rod position: (1) Push in, (2) Rise the stopper, (3) Pull out. 5. Reinstall the thrust rod securely....

• Poor tilting movement and increased noise from Power Tilt unit

  Diagnostic · Cause: Entrapped air in the Power Tilt unit Test: Perform air purging procedure: set manual release valve to Manual, tilt motor up/down 5–6 times manually, then close valve to Power side