Model Name: Model Name Decode: M (Starter)

Related KB links

• Cold Engine Starting Procedure (Manual Starter Type)

  Procedure · 1. Set the throttle grip to START position. 2. Set the control lever in the Neutral position. 3. Pull the choke knob fully. (Choke is not necessary when the engine is warm — set throttle grip to RE-START position inst...

• ENOM00561-0 - Engine failing to start

  Diagnostic · Cause: Empty fuel tank

• Model Name: Model Name Decode: E (Starter)

  Spec · Electrical start

• Manual Tilt – Tilt Down

  Procedure · 1. Slightly tilt the motor up. 2. Pull the tilt lever toward you to release the tilt-lock. 3. Lower the motor slowly.

• Power tilt switch inoperative

  Diagnostic · Cause: Battery is dead Test: Check battery charge; if dead, use the manual relief valve to allow manual tilting