Specification
Washer: Washer size – EPT
8 mm conditions={"variant":"EPT","quantity":"8"}
Specification
8 mm conditions={"variant":"EPT","quantity":"8"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Set the outboard motor to the appropriate position. 2. Secure the clamp brackets to the transom board using bolts, flat washers, and nylon locking nuts. Parts: Bolt (8 × 85), Nylon locking nut, Flat washer
Diagnostic · Cause: Galvanic corrosion consuming the sacrificial anode Test: Visual inspection of anode size relative to original dimensions
Spec · 4 conditions={"size":"8 mm","applicability":"EPT/EFT only"}
Procedure · 1. Verify all service tools are present in the tool bag: Pliers (×1), Socket wrench 10×13 mm (×1), Socket wrench 16 mm spark plug (×1), Socket wrench handle (×1), Screwdrivers cross-and-straight-point (×1), Screwdrive...
Spec · 4 conditions={"size":"8 mm","applicability":"EPT/EFT only"}