Procedure
Clean water intake screens
1. Inspect and clean water intake screens to resolve engine overheating caused by clogged screens.
Procedure
1. Inspect and clean water intake screens to resolve engine overheating caused by clogged screens.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 3,000 rpm conditions={"note":"Running below 3,000 rpm for more than 30% of operating time leads to water condensation and unburned fuel mixing with engine oil"}
Diagnostic · Cause: Serious cooling system malfunction requiring professional inspection Test: Return to nearest boat landing and have the outboard motor inspected by an authorized Honda Marine dealer
Spec · 2 inches (5 cm) conditions={"context":"Required during engine start and extended run after submersion"}
Procedure · 1. Idle the engine in neutral and check the cooling system indicator for water flow. 2. If water is flowing from the cooling system indicator, continue idling for 30 seconds. 3. Confirm the overheat indicator turns of...
Diagnostic · Cause: Clogged discharge port or blocked water intake screens Test: Stop the engine, check the discharge port, then tilt the outboard motor and inspect the water intake screens for clogs