Procedure
1. Pull the emergency stop switch lanyard to remove the emergency stop switch clip from the emergency stop switch. WARNING: Verify that the engine and emergency stop switch are operating properly by stopping the engine this way occasionally.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 5 conditions={"timeWindow":"within 20 seconds"}
Diagnostic · Cause: Emergency stop switch clip is not inserted in the emergency stop switch Test: Verify the emergency stop switch clip is fully seated in the emergency stop switch
Spec · 20 degrees conditions={"direction":"either forward or reverse","note":"Further movement beyond 20° increases engine speed"}
Procedure · 1. Move the control lever to N (NEUTRAL) position. 2. Pull the emergency stop switch lanyard to remove the emergency stop switch clip from the emergency stop switch on the control panel.
Diagnostic · Cause: Emergency stop switch clip is not inserted into the emergency stop switch Test: Verify clip is securely seated in the emergency stop switch