Procedure
1. Use the EMERGENCY STOP SWITCH with the LANYARD CLIP to stop the engine in an emergency. Attach the lanyard clip to the emergency stop switch; removing the clip activates the switch and stops the engine.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 20 degrees conditions={"direction":"either forward or reverse","note":"Further movement beyond 20° increases engine speed"}
Diagnostic · Cause: Emergency stop switch clip is not inserted in the emergency stop switch Test: Verify the emergency stop switch clip is fully seated in the emergency stop switch
Spec · Honda 10W-30 FC-W® outboard motor oil conditions={"use":"General use","oilType":"4-stroke detergent oil"}
Procedure · 1. Move the control lever to N (NEUTRAL) position. 2. Pull the emergency stop switch lanyard to remove the emergency stop switch clip from the emergency stop switch on the control panel.
Diagnostic · Cause: Emergency stop switch clip is not inserted into the emergency stop switch Test: Verify clip is securely seated in the emergency stop switch