Procedure
1. Refer to Propeller Replacement procedure for removal and installation of the propeller. 2. Coat the entire propeller shaft with 2-4-C with PTFE lubricant to prevent the propeller hub from corroding and seizing to the shaft. Parts: 2-4-C with PTFE (92-802859A 1)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2-4-C with PTFE conditions={"partNumber":"92-802859A 1","tubeRefNo":"95"}
Diagnostic · Cause: Shift cable barrel position too far from cable end Test: Shift remote control into forward and check if propeller shaft is locked in gear Expected: Propeller shaft locked in gear
Spec · Upper half of recommended full throttle RPM range conditions={"load":"Boat normally loaded","reference":"General Information – Specifications"}
Procedure · 1. Coat the entire propeller shaft with Extreme Grease (Part No. 8M0071842) or 2-4-C with PTFE (Part No. 92-802859A 1). WARNING: To prevent the propeller hub from corroding and seizing to the propeller shaft, especial...
Diagnostic · Cause: Cable barrel adjustment too far from the cable end Test: Shift remote control to neutral and check if propeller shaft turns freely Expected: Propeller shaft turns freely without drag