Specification
Power Trim Reservoir: Power Trim Fluid Level
Even with the bottom of the fill hole
Specification
Even with the bottom of the fill hole
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Tilt the outboard to the full up position and engage the tilt support lever (a - Tilt support lever, b - Knob). 2. Remove the fill cap and check the fluid level. The fluid level should be even with the bottom of th...
Diagnostic · Cause: Blown 15 amp fuse — check 14 pin remote control harness/cowl trim switch/main power relay fuse
Spec · First 20° conditions={"usage":"Operating the boat on plane"}
Procedure · 1. Trailer your boat with the outboard tilted down in a vertical operating position. WARNING: Do not rely on the power trim/tilt system or tilt support lever to maintain proper ground clearance for trailering. The out...
Diagnostic · Cause: Reduced air density from above sea level elevation, high temperature, low barometric pressure, or high humidity