Specification
Tilt lever grease fitting: tiltLeverGreaseFittingLubricant
Grease
Specification
Grease
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Completely retract the end of the steering cable before applying lubricant to avoid hydraulic lock. WARNING: Incorrect cable lubrication can cause hydraulic lock, leading to serious injury or death from loss of boa...
Diagnostic · Cause: Insufficient trim-under capability; may require greater transom angle or adjusted tilt pin position
Spec · Grease
Procedure · 1. Rotate the steering wheel to fully retract the steering cable end into the outboard tilt tube. 2. Lubricate the steering cable grease fitting (if equipped) with 2-4-C with PTFE or Extreme Grease through the fitting...
Diagnostic · Cause: Trapped water in the gearcase freezing when outboard is tilted up in freezing temperatures