Specification
XL model outboard: Maximum outboard mounting height (XL models)
30 in conditions={"warning":"Exceeding may cause gearcase component damage"}
Specification
30 in conditions={"warning":"Exceeding may cause gearcase component damage"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Use the mounting height chart (diagram 47710) to determine recommended mounting height based on anticipated maximum boat speed (MPH). The solid reference line (a) is the primary recommendation. 2. For dual outboard...
Diagnostic · Cause: Outboard mounted too high on transom — exceeds maximum mounting height for model Test: Measure mounting height: must not exceed 63.5 cm (25 in.) for L models or 76 cm (30 in.) for XL models
Spec · 25 in conditions={"warning":"Exceeding may cause gearcase component damage"}
Procedure · 1. Do not install wedges or plates between the transom clamp brackets and the transom (or jack plate). WARNING: Failure to comply with installation instructions could lead to serious injury or death. 2. Ensure the eng...
Diagnostic · Cause: Aftermarket accessories (e.g., boarding ladders, shallow water anchors, transom wedge kits, tow sport devices) mounted using the same fasteners that secure the outboard to the transom or jack plate, compromisin...