Specification
Engine: Engine Type
Two-Stroke
Specification
Two-Stroke
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Push in the choke knob. Wait 30 seconds, then continue to crank the engine for starting.
Diagnostic · Cause: Fuel flooding Test: Push in choke knob, wait 30 seconds, then continue cranking
Spec · Mercury/Quicksilver or recommended Two-Stroke engine oil
Procedure · 1. Turn the throttle grip to the slow position. 2. Put the shift lever in Neutral (N) position. Run the engine for 2–3 minutes at idling speed if it has been running at full speed. 3. Push the stop switch to stop the ...
Diagnostic · Cause: Cooling water intake obstruction, water pump failure, or blockage in cooling system Test: Stop engine and check cooling water intake for obstruction