Specification
Exhaust: Exhaust System
Through hub exhaust
Specification
Through hub exhaust
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 3. Attach the fuel connector to the engine connector. 4. Ensure the arrow mark on the primer bulb is facing the engine (separate fuel tank). 5. Open the fuel valve (internal fuel tank). Identify the air vent screw (a)...
Diagnostic · Cause: Insufficient ventilation, enclosed cabin/cockpit, or proximity to exhaust areas while engine is running Test: Check ventilation of passenger area; inspect for enclosed or canvas-covered spaces with inadequate a...
Spec · 5 minutes conditions={"gearPosition":"Neutral","throttlePosition":"Idle RPM","context":"Storage preparation – stabilized fuel run-through"}
Procedure · 1. Store outboard in an upright (vertical) position to allow water to drain out of the outboard. WARNING: Do NOT store the outboard in a tilted position. Water trapped in the cooling passages or rain water collected i...
Diagnostic · Cause: Cooling water intake obstruction, water pump failure, or blockage in cooling system Test: Stop engine and check cooling water intake for obstruction