Specification
Ignition: Ignition System
Flywheel magneto CDI
Specification
Flywheel magneto CDI
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Ensure the fuel system has been prepared for storage per the Fuel System procedure above. WARNING: Refer to Maintenance – Spark Plug Inspection and Replacement for the correct procedure for removing spark plug boot...
Diagnostic · Cause: Cooling water intake obstruction, water pump failure, or blockage in cooling system Test: Stop engine and check cooling water intake for obstruction
Spec · BRN conditions={"circuit":"Ignition primary"}
Procedure · 3. Attach the fuel connector to the engine connector. 4. Ensure the arrow mark on the primer bulb is facing the engine (separate fuel tank). 5. Open the fuel valve (internal fuel tank). Identify the air vent screw (a)...
Spec · 5 minutes