Diagnostic
Anode attaching bolts loose
Cause: Corrosion of the anode causing bolts to loosen over time Test: Manual check and re-tightening of all anode attaching bolts at each inspection
Diagnostic
Cause: Corrosion of the anode causing bolts to loosen over time Test: Manual check and re-tightening of all anode attaching bolts at each inspection
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Procedure · 1. Inspect the anode. If the anode is eroded more than 1/3 of its original size, replace it. 2. Locate the anode(s) on the gear case, cylinder, etc. Note: On Power tilt models (*1), an additional anode location applie...
Spec · Towards (B) conditions={"type":"EF, MF, EFT tiller handle"}
Procedure · 1. Locate the sacrificial anode(s) on the gear case, cylinder, etc. 2. Inspect the anode. If it is eroded more than 1/3 of its original size, replace it. 3. For the CD unit anode (*2): Remove the CD unit to access the...
Diagnostic · Cause: Galvanic corrosion consuming the sacrificial anode Test: Visual inspection of anode size relative to original dimensions