Engine failing to start

Related KB links

• Engine oil: Engine oil fill requirement

  Spec · Fill to between upper limit and lower limit shown on dipstick conditions={"engine_position":"vertical","note":"Engine oil is drained for shipping at factory; must fill before first start"}

• Recovering from stuck shift during engine warm-up

  Procedure · 1. If it is difficult to shift back to neutral after shifting during warm-up, stop the engine. 2. Manually shift to neutral position. 3. Restart the engine and allow it to warm up in neutral.

• Engine: Idle Speed in Neutral Gear

  Spec · 950 rpm

• Cold Engine Starting Procedure (Manual Starter Type)

  Procedure · 1. Set the throttle grip to START position. 2. Set the control lever in the Neutral position. 3. Pull the choke knob fully. (Choke is not necessary when the engine is warm — set throttle grip to RE-START position inst...

• Engine failing to start

  Diagnostic · Cause: Lock plate not fitted