Procedure
Daily Inspection – Other Parts (Anode)
1. Check if the anode is securely installed. Repair if necessary. 2. Check the anode for corrosion and deformation. Replace if corroded or deformed.
Procedure
1. Check if the anode is securely installed. Repair if necessary. 2. Check the anode for corrosion and deformation. Replace if corroded or deformed.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Diagnostic · Cause: Corrosion of the anode causing bolts to loosen over time Test: Manual check and re-tightening of all anode attaching bolts at each inspection
Spec · 0 °C (32°F) conditions={"situation":"Mooring in cold weather","risk":"Water residue in pump may freeze and damage pump and impeller"}
Procedure · 1. Check that the main switch functions normally. Replace if faulty. 2. Check that the battery electrolyte level and specific gravity are normal. Replenish or recharge as needed. 3. Check for loose connections on the ...
Diagnostic · Cause: Galvanic corrosion consuming the sacrificial anode Test: Visual inspection of anode size relative to original dimensions