Procedure
Daily Inspection – Steering Devices
1. Make sure that the steering handle and remote control are functioning normally. Repair if abnormal.
Procedure
1. Make sure that the steering handle and remote control are functioning normally. Repair if abnormal.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 300-450 mm conditions={"note":"Cable should be 300-450mm (11.8-17.7in) longer than the measured route distance"}
Diagnostic · Cause: Corrosion of the anode causing bolts to loosen over time Test: Manual check and re-tightening of all anode attaching bolts at each inspection
Spec · Remote control
Procedure · 1. Check that the main switch functions normally. Replace if faulty. 2. Check that the battery electrolyte level and specific gravity are normal. Replenish or recharge as needed. 3. Check for loose connections on the ...
Diagnostic · Cause: Galvanic corrosion consuming the sacrificial anode Test: Visual inspection of anode size relative to original dimensions