Procedure

Emergency Starter Rope Installation and Use

1. Remove the bolts (3 pcs) and remove the recoil starter. 2. Insert the knotted end of the starter rope into the notch in the flywheel and wind the rope around the flywheel several turns clockwise. 3. Tie a loop in the another end of the emergency starter rope and attach socket wrench that is included in the tool kit. WARNING: Be sure to keep the harness away from the rotation parts. 4. Be sure to install the stop switch lock to the stop switch, and attach the stop switch lanyard securely to the operator or to the operator's PFD (Personal Flotation Device). 5. Set the control lever in the Neutral position. 6. Pull the starter handle slowly until you feel engagement, keep pulling till you feel less resistance. Then pull it quickly. 7. After engine starts, do not reinstall flywheel cover and top cowl. Tools: Socket wrench (included in tool kit)