Model Name: Model Name Decode: Blank (Tilt)

Related KB links

• Manual Tilt – Tilt Down

  Procedure · 1. Slightly tilt the motor up. 2. Pull the tilt lever toward you to release the tilt-lock. 3. Lower the motor slowly.

• Power tilt switch inoperative

  Diagnostic · Cause: Battery is dead Test: Check battery charge; if dead, use the manual relief valve to allow manual tilting

• Model Name: Model Name Decode: T (Tilt)

  Spec · Power trim & tilt

• Manual Tilt – Tilt Up

  Procedure · 1. Place the shift lever in Neutral or Forward. 2. Hold the tilt handle provided at the rear of the top cowl and fully tilt the motor up toward you. 3. Slightly lower the motor to lock it in the up (tilt-lock) position.

• Outboard motor tilts up when operated in reverse

  Diagnostic · Cause: Manual relief valve is open/not fully closed Test: Inspect and confirm the manual relief valve is fully closed before engine operation