Specification
Outboard Motor: Break-In Phase 1 Duration
1–10 min conditions={"throttlePosition":"Idle","phase":"1"}
Specification
1–10 min conditions={"throttlePosition":"Idle","phase":"1"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Run outboard motor at Idle throttle position for 1–10 minutes. WARNING: Do not operate in a closed area or area with insufficient ventilation. Exhaust gas contains carbon monoxide. 2. Run at less than 1/2 throttle ...
Diagnostic · Cause: Possible water contamination in gear oil Test: Inspect gear oil color during oil change or inspection
Spec · 10 min – 2 hrs conditions={"throttlePosition":"Less than 1/2 throttle","phase":"2"}
Procedure · 1. Run the outboard motor at idle throttle position for the first 1–10 minutes. WARNING: Do not operate the outboard motor in a closed area or area with no forced ventilation. Exhaust gas contains carbon monoxide whic...
Diagnostic · Cause: Galvanic corrosion consuming the sacrificial anode Test: Visual inspection of anode size relative to original dimensions