Specification
Tohatsu MFS6/8/9.8B EFT/EPT: part_16
Clamp Screw
Specification
Clamp Screw
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Set the outboard motor to the appropriate position, ensuring 5–25 mm (0.2–1 in) clearance between the anti-ventilation plate and the water surface. 2. Tighten the clamp screws by turning their handles. Do NOT use t...
Diagnostic · Cause: Lock plate not fitted
Spec · Clamp Bracket
Procedure · 1. Set the outboard motor to the appropriate position. 2. Secure the clamp brackets to the transom board using bolts, flat washers, and nylon locking nuts. Parts: Bolt (8 × 85), Nylon locking nut, Flat washer
Diagnostic · Cause: Spark plug other than specified