Tohatsu MFS6/8/9.8B EFT/EPT: part_7

Related KB links

• Trim Angle Adjustment

  Procedure · 1. Assess hull attitude during operation: the anti-ventilation plate should run parallel to the water surface and the hull should be horizontal. 2. If the bow rises too high above horizontal, set the thrust rod (or pr...

• Poor acceleration

  Diagnostic · Cause: Closed air vent on fuel tank

• Anti-ventilation plate: Anti-ventilation plate running angle

  Spec · Parallel to water surface conditions={"during":"operation"}

• Starting the Engine in a Test Tank

  Procedure · 1. Ensure water level is at least 10 cm (4 in.) above the anti-ventilation plate to avoid overheating of the engine. 2. Run at idling only. 3. Remove the propeller. (See page 72)

• Engine failing to start

  Diagnostic · Cause: Lock plate not fitted