Specification
Washer: Washer dimensions – EP/EPT cable joint
8.5-18-1.6 mm conditions={"variant":"EP/EPT","quantity":"2"}
Specification
8.5-18-1.6 mm conditions={"variant":"EP/EPT","quantity":"2"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Verify all service tools are present in the tool bag: Pliers (×1), Socket wrench 10×13 mm (×1), Socket wrench 16 mm spark plug (×1), Socket wrench handle (×1), Screwdrivers cross-and-straight-point (×1), Screwdrive...
Diagnostic · Cause: Galvanic corrosion consuming the sacrificial anode Test: Visual inspection of anode size relative to original dimensions
Spec · 8 mm conditions={"variant":"EPT","quantity":"8"}
Procedure · 1. Put a piece of wood block between the propeller blade and anti-ventilation plate to hold the propeller. WARNING: Do not install or remove propeller with spark plug caps attached, shift in forward or reverse, main s...
Diagnostic · Cause: Engine operated while flushing with a hose joint attached Test: Do not run engine when flushing attachment/hose joint method is used without proper procedure