Specification
Lanyard Stop Switch: Lanyard cord length (stretched)
122–152 cm conditions={"state":"stretched out","imperial_equivalent":"4–5 feet"}
Specification
122–152 cm conditions={"state":"stretched out","imperial_equivalent":"4–5 feet"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Start the engine and pull the lanyard cord to verify the lanyard stop switch stops the engine. If the engine does not stop, have the switch repaired before operating the boat. WARNING: Do not operate the boat if th...
Diagnostic · Cause: Faulty lanyard stop switch Test: Start the engine and pull the lanyard cord; verify engine stops
Spec · 3.6 m (12 ft) conditions={"gauge":"#4","note":"Factory equipped"}
Procedure · 1. Check the engine oil level. 2. Ensure the cooling water intake is submerged. 3. Open the fuel tank vent screw (in filler cap) on manual venting type fuel tanks. 4. Set the lanyard stop switch to the RUN position. R...
Diagnostic · Cause: Lanyard stop switch not in RUN position