Specification
trim angle: trim_up
Trim up conditions={"label":"c","description":"Bow raised; trim angle increased via higher trim position pin setting"}
Specification
Trim up conditions={"label":"c","description":"Bow raised; trim angle increased via higher trim position pin setting"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Assess current trim angle while underway. Observe bow attitude relative to the water surface. 2. If the bow is entering the water (trim down / trim angle too small): water may enter the boat and speed will decrease...
Spec · Trim down conditions={"label":"b","description":"Bow enters water; speed decreases; risk of water entering boat"}
Procedure · 1. Arrange passengers and load in the boat so the weight is distributed evenly. 2. Set the tilt pin in the adjustment holes so the outboard runs perpendicular to the water at full speed, allowing the boat to run paral...
Spec · Correct trim conditions={"label":"a","description":"Optimal bow and hull attitude for performance"}
Spec · 6